Texas Instruments (TI) Logic support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search logic IC content or ask ...

I am currently working with the TMS320F28335 microcontroller and using the Example_2833xSci_FFDLB_int.c example code. My goal is to configure the system so that data is transmitted on the TX pin only ...

In theory this should be possible since LIN is a single wire protocol. However, we do not have a plan to support this.

Using CCSv12.6.0 + C2000Ware 5.01 to setup a working Target config for LAUNCHXL_F28P65x: Is there a known issue? Can you please help with the below error message? I ...

Check the generated file test.json, the 0x34, 0x38, 0x3C are configured to select PDM1 PDM1 and echo as channel0, channel1 channel2 in the I2S/TDM commnuication. 6. Copy the test.bin to the kernel and ...

im just getting started working on the API integration of my client to your Rest-API. As im setting everything up, i encountered several problems regarding your store-order-api.

Hi! I am working with INA333 to amplify a wheatstone bridge output voltage. Here is the circuit in KiCAD: I am testing the circuit with the INA output connected to a stm32f405-microcontroller ADC pin.

We are not able to find the User's Guide for the LAUNCHXL2-570LC43 eval board. I think it is not available for this device. Can you please refer schematic and quick start guide instead of it.

The 48MHz crystal and the RF components and an antenna are required. The 32.768KHz external crystal is optional but if not used, the accuracy of the internal RC oscillator can vary by more than ...

I am trying to use string concat , strcpy , strcmp function for example testData[10] = {'\x02', 'A', 'B', 'C','2', 'D','0','M','\x03'}; to concat this testData to a ...

James Evans said that never set interrupt enable other than master channel. But, if so, we can't set preload which bigger than master channel's preload to another channels. Because when interrupt ...

When customers use our chip with TI941+TI948, there are a few ics jittering screen, the specific phenomenon is as follows: screen timing: pixel clk=147.46MHz, h_act=1920, hfp=64, hbp=32, hsw=32, ...